Tuesday, October 9, 2018

Dyer's Polypore Karhunkääpävärjäys


Loppukesä oli koko kesän lailla hyvin kuiva, vasta nyt on alkanut sataa enemmän. Sain kuitenkin syyskuussa ystäviltäni joitakin karhunkääpiä (Phaeolus schweinitzii). Heillä on yksi paikka missä sitä kasvaa vanhan kuusen juurella joka vuosi muutamia yksilöitä. Sain vinkin Kaijalta Länsi-Suomesta, että kannattaa kokeilla karhunkääpienkin kanssa värjäyksessä kidesoodaa. Yleensä värjäyskirjallisuus sanoo, että karhunkäävällä pHta ei tarvitse muuttaa, ja aiemmin olenkin aina värjännyt normaalissa kaivovedessämme, joka on hapahkoa.
Karhunkääpä sisältää paljon väriainetta, ja tuntuu, että vaikka sitä olisi keittänyt pitkäänkin, niin silti siitä irtoaa lisää väriä. Sen kanssa kannattaakin tehdä niin, että keittää käävät ja siivilöi liemen, ja sitten keittää uudelleen puhtaassa vedessä, ja ehkä vielä kolmannenkin kerran keitto uudessa vedessä, niin saa mahdollisimman paljon väriainetta talteen. Liemi jotenkin kyllästyy, eikä kaikki väriaine irtoa yhdellä kertaa samaan liemeen. Keittoliemet voi yhdistää tai värjätä jokaisella erikseen.

Nämä yllä olevat langat on nyt värjätty seuraavasti:
Tuoreita kääpiä oli 1,2 kg, esipuretus aluna + viinikivi
1. ensimmäinen väri ensimmäisestä keitosta, pH 6, värjätty 300g
2. jälkiväri edellisestä, 300g
3. kääpien keitto uudelleen, nyt pH nostettu tuhkalipeällä n 8 (kidesooda oli loppunut), ja värjäyksessä pH 7, 200g
4. jälkiväri edellisestä, 300g
5. kolmas keitto, nyt väristä ei enää tullut niin voimakasta, mutta hyvä keltainen kuitenkin, pH 6, 200g

Eli uuttaen useampaan kertaan väriä irtosi niin paljon, että sain värjättyä yhtä paljon lankaa mitä kääpiäkin oli painona. Keitto emäksessä selvästi myös auttoi värin irrottamiseen, ja ensi vuonna laitankin kidesoodaa tms jo ensimmäiseen uutokseen. Viimeisen uutoksen keltaiset langat värjäsin vihreäksi väritatarliemessä myöhemmin, ja kiinnostavaa oli myös, että kun langat olivat emäksisessä indigoliemessä, ne näyttivät (ennen ylösnostamista ja värin muutosta vihreäksi) liemessä ollessaan todella oransseita, oranssimmalta kuin  no 3.  Nyt sitten jälkeenpäin huomasin, että Jenny Deanin kirjassa A Heritage of Colour on näytteet eri tavalla värjätyistä langoista ja karhunkäävällä jälkimodifiointi emäksessä on muuttanut myös hänellä värin kirkkaan oranssiksi. Omat lankani on pesty ja neutraloitu lievässä etikalla happamoitetussa vedessä, mikä ei muuttanut näiden lankojen väriä. En tiedä, miten olisi käynyt emäksessä modifioidulle langalle, olisiko se pitänyt värinsä.

IN ENGLISH
Early autumn was dry like all this summer, only now it has started to rain more. In spite of drought I got some Dyer's polypore (Phaeolus schweinitzii) from my friend. Every year they have some of them growing under an old spruce. Then another dyer here in Finland, Kaija, gave me a tip to try adding some washing soda to the bath when extracting the color from these polypores. Mushroom dye litterature says that it is not necessary to raise pH with Dyer's polypore, like with other polypores, and I have previously always extracted and dyed in acid/neutral bath with these polypores.

Another thing with Dyer's polypore is that even if you boil them a long time, there always seems to be dye left in the polypores.  It seems like the bath gets saturated with dye and you can't get all dye from the polypores in one bath. So I have found that the best way to work with these polypores is to extract the dye from them in several baths. After the first boiling, I strain the bath, and add more fresh water to the polypores and boil more, and usually do it also the third time. You can combine the baths or dye with them separately.

Yarns in the picture were dyed as follows:
1,2 kg of fresh Dyer's polypore, alum + cream of tartar mordant before dyeing
1. color from the first extraction, pH 6, yarn 300g
2. exhaust bath from the previous, yarn 300g
3. second boiling of the polypores, pH 8 raised with wood ash lye (I was out of washing soda) in the boiling, and pH 7 when dyeing, yarn 200g
4. exhaust bath from no 3, pH7, yarn 300g
5. third boiling, pH 6, yarn 200g. The color wasn't as deep as in the previous extractions

I could dye as much yarn as there were fresh polypores in weight, that is a really good ratio. Also bringing pH up in extracting seems to help getting more color out of the polypores, so next year I will do it from the beginning. The last 2 yellow skeins I dyed green later with japanese indigo, and an interesting thing was that when the yellow skeins were in alkaline indigo bath (before raising them up and oxydizing which changes the color to blue - green in the case of yellow yarns), they had turned really bright orange color.  In Jenny Dean's book A Heritage of Colour, she shows samples dyed with Dyer's polypore and there was a sample modified in alkaline bath after dyeing, and it was also really orange, so the dyes in these polypores react to alkaline environment well. I have read it and seen the picture, but somehow didn't think about it.