Saturday, March 5, 2016

Madder and birch bark Krappia ja koivunkuorta


Värjäsin uudelleen krapilla osan koivunkuorilla värjätyistä langoista.
Käytin krappia tähän puolet langan painosta (eli 50g krappia/100g lankaa), liotin krapit yön yli ja lämmitin liemen kädenlämpöiseksi seuraavana päivänä, jonka jälkeen lisäsin märät langat liemeen. Pidin värjäyslämpötilan 55-60°C ja värjäysaika oli n 3 tuntia.  Krapin punaiset värit tarttuvat paremmin kun lämpö ei pääse tuon korkeammaksi. Vastaavasti värjäysaikaa on hyvä pidentää verrattuna siihen, jos värjäisi kuumemmassa.

Kuvassa ylinnä oleva lanka on edellisen postauksen no 2, eli lanka oli puretettu alunalla ja viinikivellä ja sitten värjätty koivunkuorella vaalean punaiseksi. Keskimmäinen lanka oli purettamaton ja värjätty koivunkuorella ja alin lanka oli myös purettamaton, ja ilman muuta pohjaväriä. Kaikki langat olivat samassa krappi-väriliemessä.
Kuvasta näkee hyvin alunapuretuksen edun: väri tarttuu vahvempana ja erisävyisenä kuin jos alunaa ei olisi käytetty. Koivunkuori pohjavärinä tummensi väriä hiukan ja samalla sävykin ehkä muuttui hiukan.
Näitä lankoja on nyt myös kaupassani.

IN ENGLISH
I overdyed with madder some of the yarns I had already dyed with birch bark.
I used half the amount of madder to the weight of the yarn (50g of madder to 100g of yarn). I soaked madder overnight, and then heated the bath to hand temperature, after that added wetted yarns to the bath. I kept the dyeing temperature in 55-60°C (130-140°C) and the dyeing time was 3 hours. I get better reds from madder when the temperature is no higher than that. With lower dye temperature is is good to dye for a longer time.

In the picture the top yarn is no 2 from the previous posting, it was mordanted with alum and cream of tartar and then dyed with birch bark to pink. The middle yarn had no mordant and was dyed with birch bark (no1 in previous posting), and the bottom yarn was white with no mordant (and no birch bark). All yarns were in the same madder bath.
You can see well in the picture the advantage of alum mordant: the red attaches better to the yarn. Birch bark as base color added depth to the yarn.
I have these yarns also in my shop now.

2 comments:

  1. Really beautiful colors!The top one is especially rich and saturated - proves that the alum mordant helps the fiber take up the maximum amount of color.

    ReplyDelete
    Replies
    1. Thanks Sandra! I agree, without alum many colors would be much more pale and I wanted to show the difference:)

      Delete