Monday, July 13, 2009

Buckthorn bark Experiment Paatsamankuori värjäyskokeilu

Toissa talvena kokeilin kasvivärjäystä paatsamankuorilla käyttämällä (fermentoimalla)niitä tuhkalipeässä ja sainkin punaista niin, täällä siitä bloggaus, mutta langan pitäminen korkeassa pHssa vahingoitti sitä ja halusin kokeilla käyttämistä uudestaan. Lopputulos ei ollut nyt sellainen punainen, mitä sain aiemmin, ja syitä siihen ovat varmaankin se, että
1.pH pääsi putoamaan liian usein ja liian pitkäksi aikaa happamaksi, ehkä se olisi pitänyt olla alun perinkin korkeampi
2.myöskään lämpötila ei ollut niin korkea kuin aiemmin eli ehkä liian matala.
Lisäksi lanka oli lopulta neutraalissa liemessä, mutta ensin pitäisi saada nuo kaksi ensimmäistä asiaa oikein, jotta voisi sanoa, mikä johtui mistäkin.

Tässä kuitenkin värjäyksen kulku:
1.päivä: 290g paatsamankuoria, niiden päälle lisätty 5l vettä ja 2dl tuhkalipeää, pH oli 9.
Liemi kuorineen muuttui heti tummanpunaiseksi. Ämpäri oli sisällä n20C kansi päällä.
3.päivä: ei kunnon käymistä, mutta silti pH oli pudonnut 7ään. Lisätty tuhkalipeää, pH taas 9. Ämpäri siirretty kasvihuoneeseen, kun helteet alkoivat. Ajattelin, että siellä olisi vielä lämpimämpää kuin sisällä.
4.päivä: ämpärissä kuplia, käyminen oli alkanut
5.päivä: kuplia, mutta en mitannut pHta, oli ehkä jo putoamassa
6.päivä:pH pudonnut 6een, lisätty tuhkalipeää, kuva yllä tästä vaiheesta
10.päivä: käyminen oli lakannut jossain vaiheessa tässä välin (elämä tuli väliin ja ämpärin tsekkaaminen unohtui, argh) ja pH oli 7.
Liemi nyt siivilöity, ja kaataessani ämpärin sisältöä siivilään, huomasin, että liemi oli päältä ruskeanpunaista, mutta pohjalla kuorien päällä ihan keltaista. Tajusin tämän vasta kaataessani ja niinpä ne sekoittuivat. En muista tällaista aiemmin, mutta silloin käyminen onnistuikin loppuun saakka.
Laitoin siivilöityyn liemeen 100g alunapuretettua lankaa ja jätin ämpärin kasvihuoneeseen. Lämpötila oli päivisin reilut 20C ja öisin matalampi, nyt alkoi taas viileämmät säät.
Lanka oli värjääntynyt muutamassa tunnisssa tumman keltaiseksi.
Koska pH oli nyt neutraali, annoin langan muhia liemessä yhteensä viikon.
Langan osat, mitkä olivat liemen pinnassa, muuttuivat tumman punaisiksi parin päivän kuluttua, ja niinpä sitten nostelin lankaa hapettumaan päivittäin viideksi minutiksi. Kun lanka oli ilmassa, se muuttui keltaisesta oranssiksi, mutta kun laitoin sen takaisin liemeen, väri palasi keltaiseksi, kuitenkin tuntui, että väri tummeni joka päivä hiukan.
15.päivä: nostin langan hapettumaan puoleksi tunniksi ja nyt se muuttui hyvin tumman ruskeanoranssiksi.
17.päivä: otin langan kokonaan pois liemestä, kuva alla.

In English
I had tried to get red from buckthorn bark by fermenting it in wood ash lye earlier, and succeeded, here is blogging about it, but keeping the wool in high pH damaged it and I wanted to try fermenting agian, this time keeping the yarn in lower pH after the actual fermentation.
Now the result wasn't the red I got before and some reasons for failure are propably
1. pH dropped too low too many times and for too long periods, maybe it should have been higher in the first place
2. the temperature of the fermenting bath was propably too low
And when the yarn was in the bath, the pH was neutral, but I think first I should have had no 1 and 2 right before drawing any conclusions.

Here is how I did it:
Day1: 290grams of buckthorn bark covered with 5litres (half a bucket)of warm water and 2 desilitres (big mugful) of wood ash lye, pH was now 9. The bath changed immediately dark red. The bucket was inside (about 20Celsius) covered with a lid.
Day 3: There was no visible fermentation, but the pH had dropped to 7. I added more wood ash lye to get pH 9. I moved the bucket to the greenhouse, thinking that it would be warmer there, as we got a heat wave just then.
Day 4: there were bubbles in the bath, a sign of good fermentation
Day 5: bubbles, but I didn't measure the pH, it had propably already started to drop
Day 6: pH had dropped to 6, I added more wood ash lye, the picture above is from this day
Day 10: life interfered my experiment and I forgot the check the bath, sometime between day 6 and day 10 the pH had dropped to 7 and fermentation had stopped, argh.
I then strained the bath and while pouring the liquid I noticed that in the top the liquid was dark brownish red and in the bottom where all the buckthorn bark chips were, the liquid was bright yellow. I noticed this too late and so they got mixed together:( I don't remember this happening the last time, but then the fermentation succeeded.
I put 100grams of alum mordanted yarn to the strained bath and left the bucket in the greenhouse. Now the weather had turned cooler and rainier again and the temperature was only about 20 in the daytime and lower at nights.
The yarn had turned to dark yellow in a couple of hours.
As the pH was now neutral I decided to keep the yarn in the bath for one week.
The parts of yarn which were in the surface of the liquid, had turned to red (!) in couple of days and so I started to oxidize the yarn in the air every day for 5 minutes. When the yarn was in the air it changed to orange, but when I put it back to the bath, it changed to dark golden yellow again, but I think the color got darker each day.
Day 15: I oxidized the yarn for 30 minutes and now it turned to very dark brownish orange.
Day 17: I took the yarn away from the bath, picture below

Tässä vaiheessa vielä langan pinnassa näkyi tummempia (ja punaisempia) kohtia, jotka olivat olleet liemen pinnassa, eivät kyllä näy kovin hyvin kuvassa alla. Lanka sai hapettua narulla varjossa kaksi päivää ennen pesua.
In English
At this point there were still darker (and redder)streaks in the yarn, they were parts which had been close to the surface of the bath. Unfortunately they don't show well in the picture below.
I let the yarn oxidize for two days outside in the shade before washing it.
Hapettuessaan väri oli muuttunut tummemmaksi, mutta ei punaiseksi vaan ruskean tiilenoranssiksi (vähän kuin väriksi mitä saisi kiventierasta). Pesin langan normaalisti, ja lisäsin viimeiseen huuhteluveteen lorauksen etikkaa, niinkuin teen aina. Se ei vaikuttanut värin sävyyn, mutta toivottavasti sulki villan suomut. Ruotsalaisen värjärin (ja kemistin, luulisin) Erik Sundströmin mukaan etikkahuuhtelu myös vaikuttaa värin pysyvyyteen antrakinoniväreillä, se poistaa sokeriosat niin että väristä tulee pysyvä.
Nyt on uutta tuhkalipeää tekeytymässä uutta värjäystä varten ja nyt täytyy olla tarkempi pHn kanssa. Toinen, minkä olin unohtanut (ääh) tätä värjäystä tehdessäni oli purettamaton kontrollilanka, se pitää muistaa seuraavalla kerralla.
Jälkivärjäyksessä on tulossa keltaista, edelleen kasvihuoneessa, ja lopulta kuumennan kuoren palaset ja värjään niillä keltaista normaalilla keittovärjäyksellä.
Lepänkuorivärjäykset ovat myös valmiina, niistä sitten seuraavaksi.
In English
During oxidizing the color changed to darker, but not red, but brownish brick orange (reminding me of the color which Parmelia lichens give in boiling bath). I washed the yarn and added a drop of vinegar in the last rinse water as I habitually do. It didn't affect the color, but I hope it closed the wool scales and according to Swedish dyer (and chemist, I think) Erik Sundström, vinegar in the rinsing water when dyeing with anthraquinone dyes removes the sugars and stabilizes the dyemolecules, so that the color is fast.
Now I have new wood ash lye steeping for a new try with barks and next time I will have to be more careful with the pH. Another thing I forgot this time, was the unmordanted control yarn, I have to remember that next time!
I have yellow yarns dyeing in the afterbath, still in the greenhouse, and finally I am going to boil the bark chips and dye more yellow in the hot bath as usual.
I have alder bark dyeing also finished, about them in a few days.

4 comments:

  1. Thank you so much for posting your information and pictures; I hope to try this myself when we cut out the invasive buckthorns in our lilac hedge, and it is wonderful to have some ideas what to expect and what to do. I also didn't realize that the vinegar in rinsewater may have a chemical fixing quality for anthraquinone-based dyes, I'll have to look into that!

    ReplyDelete
  2. This buckthorn bark is really complicated and elusive, not exactly predictable - but promising a red colour it is worth trying. Thank you for posting all your "studies" in such detail.
    I was also tempted by buckthorn and obtained a considerable amount of barks, only now I'm not sure it is the right buckthorn nor was the farmer who provided it quite positive about it. It will have to wait for later this summer as there is so much green walnuts and St. John's wort dyeing these days, and in a week I'm off on holiday.

    ReplyDelete
  3. Hi Leena I have found before with fermentation that a fairly steady temperature is really important. I ferment using a heating pad which keeps the temperature between 35 and 45 degrees Centigrade depending on the ambient temperature. Fermentation at lower temperatures seems to do something a bit different. When I was experimenting with indigo vats I found that it was really important to keep the temperature steady and that fermenting without extra heat did not really work,
    Thank you for the comment about rinsing with vinegar to stabilise anthroquinones-I did not know that.

    ReplyDelete
  4. Thank youfor the comments.

    Helen, I had wished you weren't right but you are, my fermenting temperature was too fluctuating and propably too low, too!! I have read your book about indigo fermentation over and over again, and haven't dared to try indigo yet. It is too cold here:(
    I had hoped that fermenting would be possibe also in lower temerature (because how could dyers earlier ferment?), but the only one that seems to be working is madder. Of course dyeing with buckthorn bark and rhubarb root and alder bark is possible in lower temperatures, but the baths don't really ferment and thus produce only yellow/orange colors.

    ReplyDelete